Product parts and methods of use
Cleaning and maintenance
Troubleshooting
Input:100-240vac 50/60hz 1.6a
Output:dc 12v
Power
Method of use:(1)the power insert into the massage
(2)
The power plug insert into the socket
car charger
Method of use
Car charger socket outlet ends respectively connected to the
massager and vehicle socket outlet.
1.after using products, must pull the plug, then cool to stay safe before you start cleaning
2.After using, please use wet cloth clean up dust and dirt on the product.
3.
4.Please do not use wet cloth clean control panel, lest cause failure, can only use dry
cloth to wipe the control panel
5.
Please do not use corrosive cleaner, such as benzene or thinner to clean this product.
Products when not in use for a long time, please wipe clean, load cases, placed in
ventilated and dry place, in order to avoid the product be affected with damp and
affect use.
This chapter sums up the most frequently encountered problems in using this product
If you have problems not mentioned in the list, you should try the following steps.
Turning off the power of the product, unplug the power plug from the socket
Keep this product closed 60 minutes.
Insert the plug into the power socket and open the switch.
If the problem persists, please contact our customer service center.
the fault
the reason
management
The product can't work.
the socket is unpluged.
Power button is not open
This product has just finished
massage 20 minutes and
automatically switch machine
to stay mode
Products placed on the over-
load (for example, someone
standing on the products, or
have a weight placed on top
of the product).
plug the socket safely
open the power
NO/OFF
If you want to
massage again,please click
NO/OFF again.
Unplug the product power plug,
remove the excess weight.
Please insert product power and
will be open again.
product heat
The power supply cord
damaged, the product smoke
The thermostat heating
disconnect protection
You already make the pro-
duct more groups of mass-
age 20 minutes.
Cool
Internal explosion
Remove the power plug and let
its cooling products, after use
unplug the power plug of the
product
Stop using immediately and
contact the seller.
