. Unscrew the screw on the front-end of armrest (note: the screw is in the side of
steel frame). (figure 7)
. Unscrew the screw on the front-end of armrest (note: be careful not missing the
plastic block for fixed). (figure 8)
Figure 7
Figure 8
. Unscrew the screw on the back-end of armrest (note: zip the backrest kneading
cloth open completely, you may find it). (figure 9)
. Gently lift up the front-end of armrest, pull out the buckle. (figure 10)
Figure 9
Figure 10
L
ift
u
p
g
e
n
tly
. Gently pull forward the back-end of armrest to pull out the decoration cover, then
lift up the back-end of armrest to pull out the buckle. (figure 11)
. Unplug the joint of upper armrest air pipe (figure 12), the armrest removed completely.
Pull forward gently
Figure 11
Figure 12
Connect the air pipe on the back-end of armrest to the upper arm's. (figure 1)
Put the air pipe and power cord into the steel frame (avoid the air pipe stuck). (figure 2)
Figure 1
Figure 2
Hook the back-end of armrest on the steel frame (please note there are two, place
it on the upper one). (figure 3)
Insert the back-end of armrest into the decoration cover of upper arm. (figure 4)
Figure 3
Figure 4
Hook the front-end of armrest on the steel frame and lock the buckle. (figure 5)
Gently push the armrest down, double check if the hook well locked. (figure 6)
Put the plastic block between the armrest and calf rest pothook, then tighten the
up & down screws. (figure 7)
Tighten the screws on the back-end of armrest. (figure 8)
Figure 5
Figure 6
Figure 7
Figure 8
P
R
E
S
S
I
T
D
O
W
N
W
A
R
D
G
E
N
T
L
Y
5.Armrest installation method
Method of usage
Method of usage
13
12