18
Product Specification
Material description: PVC, PA, steel parts, electric and electron components
MATERIAL
PU
LEATHER CLOTH
WOOD
Model: SL-A196-10
Name: Massage Chair
Rated voltage: 110-120V~ 60Hz
Rated power: 90W
Rated time: 20min
Safety structure: Class
I
19
Note
Warning
Method of Usage
Ⅷ
.FloorProtection
·
The prolonged heavy pressure on the massage chair may cause scratches on the
floor. Thus, put a carpet or cushion on the floor where the massage chair is placed
to avoid this damage.
Do not move the massage chair with its wheels on the rough
ground or in a narrow space. At least two persons are required to
lift it. During lifting, take the legrest sealing plate and backrest cover
grooves as the acting points. (Do not lift the armrest directly.)
·
Make sure that all the wires are pulled away from the massage chair surface; then
press the backrest down to a certain angle (with the center of gravity resting on
the wheels), you can push the massage chair forward with hands, move it to a
suitable position and gently restore it to the normal angle. (Note: During
movement, you must turn off the power button first and then unplug the power
cord and the remote controller connection wire.)
Ⅸ
.
Instruction for movement
The rear moving wheels of the massage chair are only suitable for short-distance
and slow movement. For long-distance transportation, please use other auxiliary
moving tools to move this massage chair!
Legal notices
FCC Information
·
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
·
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
·
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
