15
14
（
1
）
（
2
）
（
1
）
（
2
）
3.THE PADDING AND BACK CUSHION A SSEMBLING AND OPERATION
Using the cushion which can reduce the neck & shoulder kneading
massage of the pillow, can determine according to your demands
whether to use the pillow cushion or not (recommend using the pillow
cushion).
backs of cushions connect back through zipper(1)pillow cushion and
back through is it spike joining to glue cushion(2)
Warn: Can't raise the back cushion to use , in case that cause the injur y to
you.
4.INSTALLATION AND USE OF THE CONTROLLER AND TEA TABLE TRAY
Install the controller shelf on the massage chair(1) Insert the controller
shelf in thecontroller shelf(2) The control can rotate freely and
vertically(3) The control can rotate freely and horizontally(4)
Method of usage
（
3
）
（
4
）
（
1
）
（
2
）
5.Prohibited proceeding:
1)
、
When the arms airbag groupware connect with the armrest, the spindle
can't be added with lube.
2)
、
It is forbidden to stab the airbag by needle or other sharp things.
3)
、
It is forbidden to wobble the airbag groupware in case to destroy
relevant components.
Usage:
1)
、
When the airbag groupware spindle is inserted into the hole half length
and the chair is turned on, the induction equipment in the hole receive
signal and will start feeding the air; when the groupware spindle is inserted
into the hole completely, there will be no air coming out of the joint and the
airbag will start working.
2)
、
When the airbag groupware is taken off but not completely, it is
common that there will be air coming out of the joint.
3)
、
The hand-wheel will be loose if turned to left side, and be tight if turned
to right side; it can be taken off by turning to the left side continuously.
4)
、
When take off the groupware, please check if it moves forward and
backward freely.
5)
、
In order to avoid colliding with the airbag groupware, the controller
should be put forward by 20
°
as shown in picture (1) and (2).
Method of usage
