11
10
·
Backrest and calf position adjust
3.Turn off power, stop massage
·
Press power button during massage progress, all massage function will be
stopped immediately, meanwhile you can set up memory function, the backrest
and foot part will restore. Or switch off the chair when massage time finished, you
can press the memory function button to storage the massage situation,backrest
and foot part will be restore.
·
Memory function: display with “EA” flashing instructions, press the button this time,
it start to storage the massage mode doing when stop the chair. The remote
screen will display E1. Or re-press the switch button to stop the chair with the
massage hand, backrest and foot part restore. Or waiting for 10 minutes with chair
auto stopped, the massage hand, backrest, foot part will restore.
E1
POWER INPUT
FUSE: T5AL 250V
CONTROLLER JACK
ON/OFF
Method of usage
Method of usage
Function
Button
Description
Calf rise
Calf drop
Backrest
rise
Backrest
drop
Auto lay
down mode
Press and hold this button to slowly lift the calf rest. Release
the button to stop If the calf reached max. Level, it will stop
with “di...di”alarming
Press and hold this button to slowly lower the calf rest.
If the calf reached max. Level, it will stop with “di...di” larming
Press and hold this button to slowly lift the back rest. If the
backrest reached max. Level, it will stop with “di...di” alarming
Press and hold this button to slowly lower the back rest.
Release the button to stop . If the backrest reached max. Level,
it will stop with “di...di” alarming
With three modes circulation function, when press the button,
turn into auto lay down mode.
Function
Button
Display
Memory
Function
·
Cut off the power of the whole machine.
Figure (Switch power off)
Diagram of the switch position of power supply
Power switch method map
4.Calf installation
·
When the machine under the working state, with lying and calf rest lifting, you
could not apply gravity on the calf, to prevent the massage chair does harm to
peoplebefore dumping(chart1).
·
Ensure the mechanism hands not in the seat part ,otherwise will cause
uncomfortable in the Buttock when you seating in the chair(
chart2).
Note
Chart1
Chart2
·
Use the Allen wrenches lock two hexagon socket head screws. (chart5).
·
The install hole of rail shelf (chart 1).
·
Place the isolation sleeve on both sides of the calf hook. (Outside) (chart2).
·
Place the flat washer into the pin shaft. (chart3).
·
Calf hooks install hole and rail shelf install hole should be aligned, insert the pin
with a flat washer(both sides are required to be inserted). The pins are aligned with
the screw holes for easy installation. (chart4).
Chart 1
Chart 2
Chart 3
Chart 4
Chart 5
