Irenis BLANKOM HDE-275, Руководство пользователя

Страница: 4 / 37

Quick-Start-Manual
All technical data are subject to change w/o further notice .... © Irenis GmbH 11-2022
Rearpanel: 12V DC Jack ( + = middle), RST=Reset hole, HDMI-Input connector, External
Audio-Stereo IN by 3.5mm Jack
(not included with the device),
Gigabit Ethernet
Front-Panel: USB connector for Recording, TF-Card (µ-SDCard), REC-Button, Status LEDS:
Power, Ethernet, System ready
Bottom-Sticker shows initial factory default settings:
MAC address can be changed in the Web-IF if needed.
Notes and Hints:
The Gigabit-Ethernet-port does not support PoE so please take care of not accidently using a
PoE switch- you can damage the port and the unit will be not accessible anymore.
We recommend to use an IGMP-V2/3 protocol capable GBE- Switch to avoid flooding your
network with unmanaged multicast streams. Also some consumer Internet routers do not
like Multicasts (UDP/RTP) and might reboot periodically.
An Internet-connection is not necessary as long as you need to use NTP and does not have
an own NTP server in your network.
Please asure that your HDMI –Output you like to encode is set to max. UHD with 2160p30 or
lower. Higher than p30 FPS will not work. If connecting a HDMI-Out-Player, they often need
to manually set to 2160p25 or 30...otherwise, its evtl. 50 or 60 (like Laptops often use).
The embedded Linux system takes some seconds to fully boot. After the System-LED is on,
you can connect your browser to it. We recommend Chrome, Opera, and Mozilla. For a
preview PopUp in the browser, a flash-player addon need to be installed for the browser.
Sometimes it is helpful to reload the browser – page to get the changed settings and values
because of different browser behaviours...
The RESET button will erase all your settings and the unit will be forced to start with factory
defaults. Use a thin wire to pass the small hole and press the inside button by it for at least
5-10 seconds until the System LED will go off. The encoder would perform a restart than
after releasing the button.
The Web-Interface lookalike may vary between different Versions but basically its
selfexplaining.
Left pictures:
HDE-275 Desktop Version
Right Pictures:
HDE-275 Black Box Wall Mount Version