User Manual BMM-1716
All technical values are subject for changes w/o further notifications
IRENIS GmbH © 2021
DC Status
The DC status is always displayed for a group of four SAT input signals (see point 2.) and provides in-
formation about possible errors on the SAT IF inputs. A green tick shows error free operation. If a red
cross is displayed, there is an error at the associated inputs, e.g. short circuit on the connected line.
Menu item ‘Network Settings’ (Menu -> Network Settings)
In the Menu
Network Settings
the Ethernet interface for the management of the device via web browser may be
configured. The values of the IP address, subnet mask, gateway and the management port must be adapted to
the local network -and individualized (see point 8.1). In addition, the MAC address of the device and information
about the connection status will be displayed. In the menu item
Location
, the device can be assigned to a location.
The name can contain a maximum of 24 characters. At the end of the menu, the button
Save
is located. After
pressing this button, the selected values will be set. Thereafter, a restart of the device takes place automatically,
which can take up to one minute.
Depending on the used browser the refreshing might stuck. Edge is not a good choice so we recommend to
use Mozilla:
