iReliev ET-0303, Инструкция пользователя

Страница: 11 / 16

Cleaning and Maintenance
The device does not require any special maintenance.
Remove the battery before cleaning the device.
Never use aggressive cleaning products or stiff brushes.
Device may be cleaned with slightly moistened cloth while ensuring that water
does pentrate device. Do not immerse. Do not use the device again until it is
completely dry.
Remove the battery from the device if it is not going to be used for some time.
Do not expose the device to direct sunlight and protect it against dirt and moisture.
With the electrode pad on the protective plastic film, store the device in a
cool, dry place.
Electrode Pads
For single person use only.
Clean the adhesive surface after use to achieve better adhesion.
Moisten the gel with a drop of water and allow it to dry briefly.
Then stick the electrode back on the protective film.
The length of time the electrodes remain usable depends on their storage,
skin type, and use. Store the electrode in a cool, dry place.
11
o Replace electrode when it is no longer tacky or show
cracks/blemishes are visible
o The electrode is good for 20~30 times of use, 20 min each time.
Be sure to use only iReliev® Patch Pads Refill Kit (ET-1414)
or Electrode Pads (ET-0404).
Self-adhesive Electrode Pads
iReliev® Patch Pads Refill Kit
measured by length and width of
electrode size
Size 72 x 57mm, snap type
Contact iReliev® for ordering information and replacement part(s),
at www.iReliev.com.