All rights reserved and shall not be copied and distributed in any form without written permission
11th Guiyang Street, YEDA,
Yantai 264006, P. R. China
400-998-3088
2
➢
Open the battery compartment cover anticlockwise according to the
schematic diagram on the cover.
➢
Install the batteries correctly as shown in Figure 2.
➢
After installing the batteries, cover and push the battery bay cover till hear
“click” sound to ensure both side
s of cover being installed correctly.
Attention
⚫
Disposable batteries ONLY, and there are risks to use rechargeable
batteries due to nonstandard quality.
⚫
Please do not use the different battery models or battery capacity.
⚫
The Saim series supports external power supply via Type-C cable with a
USB icon displayed on the screen.
3. Operation
A.
Power On/Off
When the scope is off, long press
P
button for 3s and waiting for 6s until thermal
image appears to start the unit.
When the scope is on, long press
P
button for 5s until the shutdown option menu
appears
, select the “√”
to shut down and
“
×
”
to cancel. Then short press the
M
button
to confirm the selection.
B.
Diopter adjustment
Rotating the focus ring and eyepiece adjustment to get the clearest image after starting
up the unit.
C.
Focal length setting
Focus operation is performed by rotating the objective lens adjusting ring.
D.
Calibration
Press
C
button for shutter correction and C for background correction.
E.
Reticle On/Off
Press and hold the
button simultaneously for three seconds and click
