iRay Technology Mars1417X, Руководство пользователя

Страница: 25 / 86

1. Safety Information
2.1. Product Description
Mars1417X is a cassette-size wireless X-ray Wireless Digital Wireless Digital Flat Panel Detector based
on amorphous silicon thin-film transistor technology. It is designed to provide the high quality
radiography image which contains an active matrix of 3500×4300 with 100um pixel pitch, the TFT
module has a pixel matrix of 3584*4352. There are 12 dummy columns for both right and left, 15
dummy rows for both top and bottom. Also, there are 30 unconnected columns for both right and
left, and 11 unconnected rows for both top and bottom.
The scintillator of Mars1417X is CsI(Caesium Iodide) which is direct deposit. Since Mars1417X supports
multiple trigger modes, it can satisfy both of the general DR system and retrofit DR system.
11 Rows 15 Rows
12 Columns
30 Columns
2.2. Principle
Detectors contain a layer of scintillator material, which converts the x-rays into light. Directly behind
the scintillator layer is an amorphous silicon pixel array contains a photodiode which generates an
electrical signal in proportion to the light produced by the portion of scintillator layer in front of the
pixel. The signals from the photodiodes are amplified and encoded by additional electronics
positioned behind the sensor array in order to produce an accurate and sensitive digital
representation of the x-ray image.
2.3. Scope
This manual contains information about iRay Mars1417X product. All operators must read and
understand this manual before using equipment. All information in this manual, including the
User Manual of Mars1417X 23