iRay Technology Mars1417X Скачать руководство пользователя страница 75

Страница: 75 / 86

6.Regulatory Information



Operation is subject to the following two conditions.

The panel may not cause harmful interference.

The panel must accept any interference received, including interference that may cause

undesired operation.



The panel generates, uses, and radiates radio frequency energy and, if not installed and

used in accordance with the instruction, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If the panel does cause harmful interference to radio or television

reception, which can be determined by turning the panel off and on, the user is

encouraged to correct the interference by one or more of the following measures.



Re o rie nt o r re lo cate the ante nna.



Incre ase the s

eparation between the panel and receiver.



Co nne ct the p ane l into an o utle t d iffe re nt fro m the re ce ive r is co nne cte d .



Co nsult the d istrib uto r o r an e xpe rie nce d rad io / TV te chnician fo r he lp .

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation

Changes or modifications not expressly approved by the manufacturer could void the

user’s authority to operate the equipment.

UNII I is in door use only

Radio Frequency (RF) Energy

This device is designed and manufactured not to exceed the emission limits for exposure

to radio frequency (RF) energy set by the Federal Communications Commission of the

United States.

During SAR testing, this device was set to transmit at its highest certified power level in all

User Manual of Mars1417X 73

Содержание Mars1417X























































































Результаты поиска

Содержание Mars1417X

Отзывы:

Похожие инструкции для Mars1417X

Бренды по названию

Популярные бренды

iRay Technology Mars1417X, Руководство пользователя

Результаты поиска

Содержание Mars1417X

Отзывы:

Похожие инструкции для Mars1417X

Бренды по названию

Популярные бренды