3
1. Introduction
Thank you for choosing the iRapid 3D printer!
This device has been designed with utmost care in order to satisfy your
requirements. To use your 3D printer immediately, please use the instructions to
setup the printer and read the information in the user manual on performing basic
functions.
Make the most out of your 3D printer by reading read the user manual carefully and
checking the latest updates from our website.
We are always striving to deliver 3D printer performance and value with an
affordable price. Your satisfaction is very important to us. Should you encounter any
problems, our expert support staff are happy to help. We are always open for
suggestions because we want you to be satisfied.
Selecting a location for the printer
When selecting a space to put the printer, you should always make sure that there is
enough space to open the printer trays, covers and doors. The following
requirements must necessarily be met:
•
Make sure that there is sufficient air circulation in the room.
•
The 3D printer must be on a flat, sturdy and stable surface.
•
You should make sure that the 3D printer:
–
Is not exposed to a direct airflow through air conditioners, heaters, or
ventilators.
–
Is protected from direct sunlight, humidity extremes or temperature
fluctuations.
- Is always clean, dry and free of dust.
2. Safety instructions
CAUTION: Do not leave the printer unattended while it is in use.
Suitable for adults (aged 18 or over).
CAUTION - POTENTIAL INJURY: Please read the safety information before
connecting cables or electrical components.
Connect the power cord to a properly grounded electrical outlet that is near the
product and easily accessible.
This product should not be placed or used near water or in a damp environment.
CAUTION - HOT NOZZLE: The nozzle and the immediate environment can be
Содержание personal 3d printer
