iRacing Dallara IR-01, Руководство пользователя

Страница: 13 / 19

13
DALL ARA iR01 | USER MANUAL
CORNERS (ALL FOUR SECTIONS)
CORNER WEIGHT
This displays the weight on each wheel while sitting in the garage under static conditions. Useful for determining weight
distribution.
RIDE HEIGHT
Chassis Ride Height is the distance from the ground to a reference point on the bottom of the chassis.
CAMBER
Camber is the vertical angle of the wheel relative to the center of the chassis. Negative camber is when the top of the wheel is
closer to the chassis centerline than the bottom of the wheel, positive camber is when the top of the tire is farther out than the
bottom. Due to suspension geometry and corner loads, negative camber is desired on all four wheels. Higher negative camber
values will increase the cornering force generated by the tire, but will reduce the amount of longitudinal grip the tire will have
under braking. Excessive camber values can produce very high cornering forces but will also significantly reduce tire life, so it is
important to find a balance between life and performance
TOE-IN
Toe is the angle of the wheel, when viewed from above, relative to the centerline of the chassis. Toe-in is when the front of the
wheel is closer to the centerline than the rear of the wheel, and Toe-out is the opposite. On the front end, adding toe-out will
increase slip in the inside tire while adding toe-in will reduce the slip. This can be used to increase straight-line stability and turn-in
responsiveness with toe-out. Toe-in at the front will reduce turn-in responsiveness but will reduce temperature buildup in the front
tires.
DALLARA iR01 | ADVANCED SETUP OPTIONS | CHASSIS