Series HAB
Page 23
LT169 Aug 10, 2021
Installation Instructions
-
Electrical Connection / Code Requirements
The Habanero Heaters require 24VAC power supply (transformer to be supplied by installer). In all
cases, heaters must be electrically grounded in accordance with local codes or in their absence, the
National Electric Code,
ANSI/NFPA 70 in the US, and the
Canadian Electric Code,
CSA C22.1.
Heaters may also be controlled with a manual line switch or timer switch in place of the thermostat.
Refer to wiring diagrams below for guidance on electrical wiring of heaters.
If any of the original wire as supplied with the heater must be replaced, it must be replaced with wiring
having a rating of at least 105°C temperature service and 600 volts capability.
Internal wiring diagram.