IR Energy ETSV Series, Руководство пользователя

Страница: 11 / 22

Series ETSV - Models 40, 80 September 14, 2020 Page 11
General Requirements
Heaters are normally controlled by line voltage (120V) or low voltage (24V) thermostats� Line voltage thermostats are wired
directly while low voltage thermostats use a relay� In all cases, heaters must be grounded in accordance with the National
Electric Code, ANSI/NFPA 70 in the US, and the Canadian Electric Code, CSA C22�1 in Canada, and must comply with all
local requirements� Heaters may also be controlled with a manual line switch or timer switch in place of the thermostat� Refer to
wiring diagrams below for guidance on electrical wiring of heaters�
If any of the original wire as supplied with the heater must be replaced, it must be replaced with wiring having a rating of
at least 105°C temperature service and 600 volts capability�
F - Fuse - 2 Amps (Optional)
Electrical Wiring
Internal Wiring ETSV40 & 80