©2011 IQtronic, Ltd
Page 12 of 34
TURNON1=123
Turn the socket on for 123 minutes. TurnedOn1 123 min
Ctrl
TURNON2=123
Turn the auxiliary output on for 123
minutes.
TurnedOn2 123 min
Ctrl
RESTART
Change (negate) state of the socket
and the output for time preconfigured
by command RESTARTTIME.
Restarted
Ctrl
RESTART1
Change (negate) state of the socket
and the auxiliary output for time
preconfigured by command
RESTARTTIME.
Restarted1
Ctrl
RESTART2
Change (negate) state of the socket
and the auxiliary output for time
preconfigured by command
RESTARTTIME.
Restarted2
Ctrl
STATUS
Get status of IQsocket IQSW-GSM:
socket and auxiliary output, time,
temperature, last power lost event,
input state and GSM signal.
Output:OFF/OFF,
Time:yy/mm/dd,hh:mm:s
s, TEMP: 25
°
C
Signal:76%, Last PWR
Lost:
yy/mm/dd,hh:mm:ss,
Input: Not connected,
Alarm ACT.
Ctrl
RINGON
A call-back to the sender‟s number
will be made. Useful to keep-alive of
credit in prepaid SIM cards.
Ctrl
Note…
Maximum time value of TURNON command is 180 minutes.
If a power failure occurs during TURNON= / TURNOFF=
commands, time of power failure is not included in the
countdown, so e.g. you need to run an appliance for a hour
issuing TURNON=60 command, but AC power is lost after
30minutes and restored back say after 2hours, appliance will
be running for half an hour after power is restored back.
Status message informs about Input alarm following ways:
ON, if input alarm function is turned on,
OFF, if input alarm function is turned off,
ACT, if input detected an alarm state,
DET, if input detected an alarm state but input alarm is off,
DIS, in plug from the input jack has been removed (like a
tamper indication) while alarm function is turned on.
