GW-GSM-02
Data logging
Logs
– the tab to read system or data
records and clear all log memory.
Read
button
– loads the entire
contents of the internal memory to the
list above.
Clear Memory
button
– deletes all
logs stored in Flash memory
Log type selection
IQRF
– To display data records logged
from TR module only.
System
– To display records with
logged system states and events only.
Log display selection
ASCII
tab
- All recorded bytes are
interpreted and displayed as ASCII
characters.
HEX
tab
- All recorded bytes are
displayed in hexadecimal format. Each byte is separated by the dot character.
TCP Client
TCP client
tab to test the gateway.
IP address
of the gateway must be
filled in the box above the
Connect
button. When the
GW-GSM Tool
is
connected to the gateway via USB
cable, the IP address is stated
automatically.
Port number
– fixed 10001 value is
used.
Connect
button
establishes a TCP
connection to the gateway.
Send
button
– Sends packet to the
gateway containing data from the box
above the
Send
button. This control
works only when the client is connected
to a TCP server.
Data box
- This box contains
predefined commands for TCP server.
Any additional data can be entered into
the box.
Clear window
button
- clears the TCP
client terminal window.
© 2013 MICRORISC s.r.o.
www.iqrf.org
UG_GW-GSM-02_131016
Page 10
Predefined commands
TCP client tab
Logs tab - hex format
