Iqinvision Alliance-mini Series, Инструкция по установке и эксплуатации

Страница: 7 / 16

2. Mount the IQeye Alliance-mini camera base to the desired wall or
ceiling surface using the supplied or equivalent mounting hardware.
3. Remove the camera shroud by placing
the palm over the top of the shroud, then
gently squeezing the two tabs toward the
front of the shroud toward the center of
the camera. Pivot these tabs away from
the camera then pull the shroud off the
camera as shown in Image 6.4.
4. Set the field-of-view using the IQeye
Alliance-mini’s 3-axis gimbal.
5. Focus the camera by twisting the fixed-
focal length lens clockwise or counter-clockwise to achieve the
desired focus.
NOTE: Leave the rubber o-ring around the lens mount in place as shown in image 6.5.
6. Replace the camera shroud by first positioning the shroud against the
rear shroud tab then pivoting the shroud down toward the front two
mounting tabs. Squeeze the shroud gently and push it down to engage
the front two mounting tabs.
7. Replace the trim cover
Standard Camera Model: attach the camera trim cover to the camera by
pushing it gently on to the camera. You should hear an audible SNAP as the
trim ring fastens into place.
Image 6.4
Image 6.5
Image 6.6
7