iQe RT021, Руководство пользователя и инструкция по установке, Страница: 12 / 24

Direct Wall Mounting
Offer the plate to the wall in the position the RT021 is to
be mounted and mark the fixing positions through the
slots in the wall plate. Drill and plug the wall, then
secure the plate in position. The slots in the wall plate
will compensate for any misalignment of the fixings.
Wiring Box Mounting
The RT021 wall plate may be fitted directly on to a
single gang steel flush wiring box complying with
BS 4662:2006 + A1:2009, using two M3.5 screws. The
RT021 is suitable for mounting on a flat surface only; it
must not be positioned on an unearthed metal surface.
Electrical Connections
All necessary electrical connections should now be
made. Flush wiring can enter from the rear through the
aperture in the wall plate. For mains voltage
applications a 3 Amp fused spur should be used. The
recommended cable size is 1.0mm2.
12