background image

MAIN MENU 

To access the MAIN MENU take the following steps:

MENU OPTIONS

Press ENTER  twice

Press '-' or '+'  to 
toggle between the 
menu options

Programme

This allows the user to adjust the different 
time and temperature settings from the 
factory default settings shown in the table on 
page 8.
Up to six different temperature levels can be 
set in any 24 hour period

Standby

This puts the CS317 into Frost protection or 
Standby condition and allows the heating to 
be permanently switched off but will activate 
and switch the heating on if the temperature 
in the house falls below the standby 
temperature set.
All programme settings are overridden and 
the unit will not return to normal operation 
until the standby period has ended by 
pressing the ENTER button. 

Holiday

This puts the CS317 into a temporary 
standby mode with a start and end date 
which can be set to coincide with a holiday 
period. At the end of the set period the 
CS317 will resume normal operation

Time / Date

The CS317 has a built in clock and calendar. 
This will require setting on initial installation. If 
this has not been set on installation please go 
to Setting the TIME and DATE section on 
page 14 before continuing

Set Up

Enables the programming of various options 
outlined in the SET UP MENU on page 15 of 
these instructions – These should be set on 
installation.

9

Содержание CS317

























Отзывы: