Remote Control
Speakerphone
The LED Status indicator
description
Connection
1.Connect the camera and Hub with the original DIN6 data cable;
2.Connect the speakerphone and Hub with the original DIN6 data cable;
3.Connect the power supply equipment with the original power adapter;
4.Connect one end of the USB cable to the USB port of the computer and video
conference system, and connect the other end to the USB socket of the Hub;
5. Turn on the power switch after the connection was confirmed correct, and wait
for the speakerphone and Camera self-check completed, turn on the terminal
third-party conference software, and select the corresponding Camera, microphone
and speaker driver to start the audio and video conference with the device.
1: Volume down
2: Volume up
3: Pan / Tilt
4: OK
5: Zoom out
6: Zoom in
7: 1-2 Camera presets
8: Hang up
9: Mute microphone
10: Pick up
11: Turn on/off Bluetooth
Presets button
Remote control button
Zoom in/out
Camera pan / tilt
Volume button
Bluetooth button
End call
Answer call
Mute microphone
Echo cancellation
Status indicator
Volume indicator
Bluetooth indicator
Blue LED light
Red LED light
Blue LED light
Red light
The higher the volume, the
more the number of lights
1.Turn on the Bluetooth, the
green light flashes
2.Bluetooth connection,
green light is always on
Y type Bluetooth
indicator
Speaker mute
USB connection
Microphone mute status
Keys Description
Connection steps
USB cable
DIN6 cable
Power Supply
DIN6 cable
1
2
3
4
5
6
7
8
9
10
11
3
C
1
2
+
+
