IQ Technologies PRO V, Руководство пользователя

Страница: 3 / 14

1. The built-in lithium battery can be recharged through either the power converter or a
computer USB connection.
2. When the battery indicator on the LCD display screen is blinking, it indicates the
battery is low. When charging the red light and green light of the charger are on, and
when the charging is finished only the green light is on.
3. The battery should be charged for 8 hours before the first use.
4. When charging the battery with the USB connection, do not charge for more than 2
hours.
5. PRO V should be charged at least every 3 months in the event it is not
used regularly.
6. Connect the pads to the wire by snapping them on.
7. Remove the protective film from massage pads.
8. Applying few drops of water on both pads with your finger (This makes the massage
sensations stronger).
9. Apply the massage pads on your body and plug the electrode wire into the output
port of the unit.
10. Turn the unit switch on. When being on, the unit will automatically start at Mode 1.
11. To change the mode press the M button, and gradually increase the intensity of the
A (left) output by pressing the + button; decrease the intensity by pressing the – button.
12. When the T button is pressed, one of the six timers could be selected. When
pressing the ► II button, the unit will stop. And when the button is pressed again, it will
start the unit at the last intensity and mode.
13. When pressing the B button, switch from the control of the A (left) output to that of
the B (right) output; only the intensity of the B output could increase or decrease by
pressing the + or – button. When pressing the A button, switch back to the A output;
only the intensity of the A output could increase or decrease.