SECTION FOUR
OPERATION AND TESTING
Turn on the power to the lantern, the lamp should illuminate.
If you have purchased the OPTIONS Module, please refer to the "Operation and Testing section
of the OPTIONS module manual.
If you have any problems, please refer to the troubleshooting guide and Technical Helpine details
below.
SECTION FIVE
TECHNICAL SPECIFICATION
If you experience problems refer to Troubleshooting Guide.
If problems still exist, do not immediately return the unit to store.
Telephone the IQ Customer Helpline
0871 71 71 100 Weekdays 9.00am - 5.00pm
[email protected] www.iq-europe.co.uk
Qualified Customer Support Co-ordinators will be on-line to assist in resolving your query.
SECTION SIX
TROUBLESHOOTING GUIDE
PROBLEM
Lantern did not operate at all.
SOLUTION
Check that the power is switched ON at the circuit breaker/
internal wall switch.
Turn OFF the power to the unit and check the wiring
connections as per the diagram (see previous section 3).
Ensure no connections are loose.
Check the lamp. If the lamp has failed, replace. Ensure that
the lamp is seated correctly in the lampholder.
IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN.
IF OPTIONS MODULE IS USED PLEASE REFER TO THE
TROUBLESHOOTING GUIDE IN THE OPTIONS MODULE
MANUAL.
Power Supply
Maximum Switchable Load
Environmental Protection
230 - 240V AC ~ 50Hz
60W GLS or Equivalent CFL ES Energy Saving lamp.
IMPORTANT! If using the OPTIONS Module, please
refer to its instruction manual for important information
when using Energy Saving Lamps
IP44 Suitable for outdoor use
