- 13 -
2.3 Installation of the Lens Assembly
The camera is designed with a CS- mount, allowing you to install
any standard C or CS lens that are commonly used in the
surveillance application.
To install new lens assembly, follow the instructions below:
1.
Remove the protective cap.
2.
Fit the C or CS lens onto the CS-mount ring and screw it in
clockwise.
3.
Plug the cable to the DC-Iris connector on the side panel of the
camera.
4.
When you use a DC-Iris lens on your camera, you can adjust
the brightness of the video image through the Iris Level screw-
know on the back panel of the camera.
Installation of the Lens Assembly