Product Descriptions of BRT-701
Page 2 of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
As shown in Fig. 1 and Fig. 2, BRT-701 speed control switch has one keypad and 5 LED
indicators on the front, and wiring terminal blocks on the back. Each LED indicates the current fan
speed, respectively.
Specification Parameters:
Input Voltage
220
～
240V(50Hz/60Hz)
Operation
Environment
No-condensation 20-90% RH
，
-20
℃～
40
℃
Wattage
150W
Load type
Motor
Mounting Hole
Spacing
60mm
Matching
Box
75mm x 75mm x 50mm
Dimension
86mm x 86mm x 43mm
Weight
89g
Wiring Diagram and Installation Guide:
BRT-701 speed control switch only require two wires for installation:
Hot wire (ACL):
Coming from the power line with 220V; and
Load wire:
Going to the load.
Fig. 3
BRT-701 Wiring Diagram
Warning:
Please make sure power is turned off before starting installation!
Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There
are three easy steps:
Step one:
Use a screwdriver to pry off the front plate in position A;
Step two:
Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install screws and front plate.
