Product Descriptions of BRT-106
Page 2 of 4
Shenzhen Asia Bright Industry co., Ltd., Building 10, Asia Industrial Park, Gangtou, Bantian, Shenzhen, China.
© 2015 All rights reserved. Subject to change without notices.
As shown in Fig. 1, the BRT-106 timer switch has an LCD display and two On/Off buttons on the
front. The LCD display shows the current time and the current status of the switch. The On/Off
buttons are used for turning on or turning off one load, respectively.
When one of the On/Off buttons is pressed, the display will show On and the display will also
show load # (1 or 2).
The load will be turned on immediately; and
When the On/Off button is presses again and the display will show Off,
If there is no delay off time being set, the load will be turned off immediately; or
If there is delay off time being set, the load will be turned off only after the preset delay off
time runs out. Meanwhile, the display will show a “bell” sign. Press the On/Off button will
cancel the delay off operation and turn off the load immediately.
Fig. 3
Hidden 9 Keypad Panel
As shown in Fig. 3, the front plate can be flipped down from the top edge. A 9 keypad panel
hidden behind the front plate is used for setting up the timer. Please refer to
“
BRT-106 Timer
Switch Setup” for details.
Specification Parameters:
Input Voltage
220
～
240V/50Hz
Operation
Environment
No-condensation 20-90% RH
，
-20
℃～
55
℃
Wattage
Resistive
：
1000W
Inductive
：
500W
Capacitive: 200W
Load type
All Types
Mounting
Hole
Spacing
60mm
Matching
Box
75*75*50 mm
Dimension
86*86*43mm
Weight
112g
