© 2013 iPulse Systems
Page 4
ORIENTATION
Top view
1
Magnetic card swipe slot
.
Swipe the card from left or from right. The magnetic strip on the card must face down and toward the
scanner. This slot can also be used to locate the SA driver card when scanning
2
Left scan button (scroll up button)
Momentarily press and release this button to scan a barcode. Release the button when an audible
beep is heard. In scan mode this button has the same function as the right scan key. This button is
also use as a scroll up button in the menu section.
3
Display
Refer to page 7
4
Mini USB client connector
The mini USB cable is required to configure the scanner for the first time as well as to upload saved
data from the scanner in case a WI-FI network is not available.
The USB cable is also used to charge the scanner when connected to a PC.
Note: The scanner can also be charged from any 5V/1A charger terminated with a mini USB
connector.
5
Finish (back button)
This button is used to indicate the end of a transaction. Typically when you have finished scanning a
vehicle (and its occupants) you would press the finish button and proceed to the next vehicle.
2
4
3
9
1
8
7
6
5
