IPSO HC100, Инструкция по эксплуатации

Страница: 31 / 35

31
6
When one of the following malfunctions occurs during a program, the central
display will communicate the appropriate error message at the end of the
cycle.
E3 (Eprom)
The Eprom is wrong, replace it by another.
Error messages
Remark :
For coin op machines, it is possible that a program number appears on the
right display in combination with E3.
This indicates a wrong price adjustment for this program. A coin value “
0 ”
or bigger than “1000” was programmed.
Example : wrong price adjustment for program 5.
E4 (water level)
The appropriate water level was not reached after 15 minutes.
E5 (Heating)
The wash bath did not reach the required temperature after 80 minutes of
heating.
E6 (door lock)
The door lock was released during the wash cycle.
E7 (safety level)
The water was insuffi ciently drained, the machine did not spin and the water
is possibly still inside the tub.
E8 (temperature sensor)
The temperature sensor is probably broken or malfunctioning.