IP0051
User Guide ver. 1.1
5 SIP + 1 IAX
page 9 of 20
© IPshop ApS 2009
C:\I_drev_tmp\IP0051\IP0051_user_guide.doc Ver. 1.1
Function keys
Descriptions
Conf
Press this key to make 3-way conference call; this key functions the sameas
CONFERENCE on the keypad.
Switch
Press this key to switch the line you want to hold or unhold.
Split
In 3-way conference state, press Split to end it, bu can be available to keep the
communication with the other two separately.
End
In 3-way conference state, press End to end all communications with the other two at
the same time.
Option
While checking phonebook and call record, press Option to enjoy further more
operations.
5.2 LED status display explanations
●
MUTE LED: when MUTE is on, LED displays red if there is incoming call or in the call status.
●
Network LED: LED is dark means no connection on WAN port; LED flashes green light means
there exist network flow.
●
POE LED: When Power over Ethernet function turns on, LED is bright with light.
●
Power LED: It brights means power supply is available.
●
Memory LED: It can display different color and tell the presence status. Red color means the
ext. is offline, green means the ext. is free and available, while the flashing green light means the
ext. is busy or in the call status. More info please check 7.4.2 Memory Key.
●
Message LED: It will flashes when there is voice mail from the server.
●
LINE LED: Failed registration, LED is green and flashes occasionally.
When comes the call and it rings, LED will frequently flash green light.
In HOLD mode, LED will frequently flash green light.
In call status, LED is on with green light.
6 Configuration via Keypad
6.1 Network config
The phone defaults to obtain IP address via DHCP.
If DHCP mode isn’t supported from your netwrok environment, please congif static IP address
according to the following instructions:
Press MENU key and select “Advanced” as the picture shows.
Enter password 123 and select “Network”. Then you can select the net mode according your
network connection model. Let’s take Static IP config for an example.
