background image

STARTING  AND  STOPPING  A GAME 

There  are two ways to start a game:  with one of the buttons on  the  score panel or  by touching 
am illuminated spot in standby mode. 

Keep the 

START  button 

pressed  for three seconds to stop an active game. 

Score panel 

1.

Press one of the nine  game  buttons on the panel  to start a new game.

2.

If necessary,  follow the spoken instructions of  the chosen game.  This is always  needed

in 2P2P mode.  In  lP  and  2P modes,  this is needed for the following games:

• Back to  Base
• Capture the  Flag
• Timer

Starting spot 

In standby mode,  all the connected spots will  light up in turn.  Touch an  illuminated spot to 
restart the last game or sound theme played. 

Choosing a fixed starting spot 

A fixed starting  spot can also be  set. 

1.

Keep both the 

and 

OK buttons 

pressed for three seconds.  'CONF' appears on the

panel.

2.

Press  the 

25  HITS button 

to switch this option on or off.

3.

Confirm your choice with the 

OK button.

4.

Touch a spot to  select  it.  The spot  lights  up green  (blue  in play  mode  HIT)  and now

acts as fixed  start  spot.

-

------------

C

Q,_ 

)➔ 

-

=t;�

---

HOLD 

3S 

T

he  fixed  start  spot  does  not  take  part  in  the  game.

TAP 

The fixed start spot can  be reset  by switching  this  function  off.  A new start spot can  be chosen when this

function  is switched on  again.

Содержание Zap A Mole







Отзывы: