6/26/13
setup.html
file:///C:/Documents and Settings/og/My Documents/My Pictures/gimbal/setup/setup.html
2/4
2. Fitting should be loose You will tighten after adjusting the parts to level "using a level" in X and Y axis. After you find the level point hold it and
tighten the 25mm clamps till joint no longer moves. All Joints must be level on there own plane.
Set up for use:
1. Find the center of gravity
Move the camera tray assembly to the center of the frame , attach camera.
Move rear tray assembly left to right until is balanced (not tilted toward the ground left or right on the Roll Axis) not touching the ground on either
end of the camera tray. when you're happy tighten the clamps on rear Roll assembly.
