SECTION 3: INSTALLATION INSTRUCTIONS
M64700G25-FCCRpt.doc
Page 7
Table 4 lists the components required to perform a successful high speed mobile radio installation and
are available for purchase through
IP
MobileNet, Inc.
TABLE 4: MOBILE INSTALLATION ACCESSORIES KIT
QTY DESCRIPTION IPMN
PART
NUMBER
4
Screws, Self Tapping #10 X 5/8
37040010-10
1 EMI
Filter
127.0020.002
1
Timer, 2 hours
150.0127.004
1 Relay
128.0117.001
1 Relay
Socket
128.0116.001
2
Butt Connectors #8 AWG
120.0256.001
1
Terminal, Ring #8 AWG, #10 Screw Insulated
120.0127.001
4
Terminal, Ring #18-22 AWG, #10 Screws Insulated
120.0250.004
4
Terminal, Ring #10-12 AWG, #10 Screws Insulated
120.0250.005
4
Terminal, Disconnect #14-16 F
120.0244.002
18
Terminal, Disconnect #10-12 F
120.0244.003
2
Disconnect Tab, Quad Male
200.1377.001
1
Wire, 12 AWG Black, order 5 ft.
156.0242.001
1
Wire, 12 AWG Red, order 44 ft.
156.0242.003
1
Fuse, 15 AMPS ATO
122.0042.003
2
Fuse, 30 AMPS ATO
122.0042.001
3
Fuse Holder, 12 AWG
120.0253.001
1
Switch, Toggle DPST
144.0136.001
1
Diagram, Mobile Installation (included in this manual)
502.80259.52
1
Diagram, Diversity Antenna Mobile Installation Detail (Typical Install)
DT450-10-0201
Table 5 lists the auxiliary equipment required to complete the installation process.
TABLE 5: AUXILIARY EQUIPMENT
QTY DESCRIPTION IPMN
PART
NUMBER
1
Serial Cable (DB9MF), 20 ft.
156.0245.020
1
Wire, 8 (133/29) AWG VW-1 Red, by foot, order 19.5 ft.
156.0243.003
1
Wire, 8 (133/29) AWG VW-1 Black, by foot, order 19.5 ft.
156.0243.001
2
RG8X Cable and Mount, 800 MHz, 17 ft. (incl ¾“ Brass Mount & N
Male Crimp)
102.0200.002
2
Antenna, Radome type, 806-866 MHz, 3dB Gain (requires 1 MB8XN
for ea antenna)
102.0207.001
2
Antenna, Radome Type 821-896 MHz, 3dB Gain (requires 1 MB8XN
for ea antenna)
102.0207.002
2
Antenna, 5/8 Wave, 806-866 MHz, 3dB Gain (requires 1 MB8XN for
ea antenna)
102.0199.001
2
Antenna, ¼ Wave, 806-896 MHz, Unity Gain (requires 1 MB8XN for
ea antenna)
102.0204.010