IPG Intertape RSA 3036-SB, Руководство по эксплуатации

Страница: 22 / 93

UDM644-00 RSA3036-SB Manual 22
UM644TW
Speed of raising of Top Tape Head Box
If the Top Tape Head box bangs when it reaches its apex or ascends to quickly the flow
controls at the top of the side cylinders need to be adjusted (Figure 20. Using a flat head
screwdriver, turn clockwise to slow the ascent and counter-clockwise for a faster ascent.
Both cylinders should be adjusted the same amount and should be done 1/8 of a turn at
the time.
Drive Bases
Speed of closing and opening:
The Flow Control Valves at each end of the drive base cylinder under the machine
controls the speed of closing and opening of the drive base. Using a flathead screwdriver,
turn clockwise to slow the movement of the drive bases and counter-clockwise for a
faster movement. This adjustment is to be done 1/8 of a turn at a time. The flow controls
regulate the flow of the air exiting the cylinder.
For Heavy boxes:
The air pressure should be increased, by 5 PSI at a time on the DRIVE BASE - CLOSED
regulator by turning the green knob clockwise until the box can be centered by the drive
bases.
Different types of boxes may require slightly different adjustments than those that are
factory-preset.
Figure 20
Flow Control
Adjustment Flow Control
Adjustment