IPG Interpack USC 2024-BB 3, Руководство по эксплуатации и список запасных частей

Страница: 47 / 56

Troubleshooting USC 2024-
BB 3” UNIFORM SEMI-AUTOMATIC CASE SEALER
6-2
Trouble Possible Causes Solutions
Drive belts start, then
stop. Motor starter trips. Call maintenance.
Void Fill cases do not
process properly. Upper Tape Head wipe down rollers
collapse inside case. -Install lighter gauge Tape Head
main spring.
-Reduce unwind tension on tape roll.
a. Mandrel tension.
b. Clutch roller tension.
Overfilled cases do not
process properly. Product height exceeds case height.
Excessive Void Fill dunnage.
Top Tape Head box is not adjusted
properly. -Reduce product in case to match
case height.
-Increase case height to match
product height.
Reduce Void Fill dunnage to match
case height.
Readjust Top Tape Head box to
proper case height.
Unstable cases do not
process properly. Case height exceeds 1 ½ times the
case length. -Re-configure case dimensions so
that case is not unstable.
-Process case on top and bottom
belt drive machine.
Tape not centered on
case. Tape roll mandrel not centered on case.
Tape roll not fully pushed on tape
mandrel. Center tape roll mandrel, See Tape
Head Manual.
Push tape roll completely onto tape
mandrel.
Tape leg is too short/too
long. Tape leg adjustment not correct.
Tape Head is not threaded correctly.
Tape roll unwind tension is too strong
or too weak. Adjust tape leg, See Tape Head
Manual.
Thread Tape Head correctly
(
page 4-12 ).
Adjust unwind tension, See Tape
Head Manual.
Rear tape leg is folded or
wrinkled. Tape threaded incorrectly.
Adhesive build up in tape path.
Dull blade.
Excessive unwind tension from tape
roll. Review tape threading ( page 4-12 ).
Clean tape guide rollers to provide a
free rotation.
Clean tape path, blade.
Replace blade.
Adjust mandrel tension and clutch
roller tension, See Tape Head
Manual.
Tape does not cut. Blade dull.
Insufficient tension at the clutch roller. Replace blade.
Increase clutch roller tension slightly,
See Tape Head Manual.