INSTRUCTIONS FOR USE
START UP
When the receiver is started up for the first time, a quick start up menu will appear on the screen making it
easier to set the receiver and tune the channels.
1.- Use the up and down movement buttons to select the parameter that you want to set. Press the ok
button to show the configuration options for each paramete (language, date and time, cable network
configuration, DHCP, DNS, etc).
2.- Select the search option (menu Instalación > Búsqueda Automática) and press the OK button to start
tuning. The TV and radio programmes that are tuned will be shown in the TV and radio column
respectively. The search could take several minutes.
3.- To cancel the installation process, select the option ‘Cancelar’. In this case or if no channel has been
tuned, the following message will appear on the screen “
No se encontró ningún canal
”. If no channel has
been tuned, check the aerial connection.
MAIN MENU
Accessing the main menu we can adjust the receiver configuration, channel installation, play the contents of
a USB drive, programme recordings, etc.
1.- Press the MENU button and the main menu will appear on the screen.
2.- Press the left and right movement buttons to choose an option and press OK to select.
CONFIGURATION
Press the up and down movement buttons on the remote control to choose the following options:
- 8 -
EN