ipf electronic PY740025, Руководство пользователя

Страница: 65 / 67

MANUAL [ PY740025/26 ]
•
Subject to alteration! Version: 22.10.2018
ipf electronic gmbh • Kalver Straße 25 - 27 • 58515 Lüdenscheid │ Tel +49 2351 9365-0 • Fax +49 2351 9365-19 │ info@ipf.de •
www.ipf.de
65
ATTENTION!
The use of a sensor with a broken front glass or dissolved or detached
lens may result in hazardous radiation exposure.
7.3 Influence of ambient light
Ambient light from lamps, the sun, etc. in the view field of the sensor can lead to malfunctions or a reduction
of accuracy and should be avoided as much as possible.
7.4 Front (optics)
In the event of broken front window, broken display panel or loose or detached laser optics the sensor must
immediately be disconnected from the power supply and it must not be put back into operation until it has
been repaired by an authorized person.
Non-compliance with these safety instructions may result in hazardous radiation exposure!
7.5 Cleaning the sensors
The laser distance sensors do not require any maintenance, except that the front windows must be kept
clean. Dust and fingerprints can impair sensor function. It is normally sufficient to wipe the windows with a
clean (!), soft lens cleaning cloth. Alcohol or soapy water can be used in case of severe soiling.
The display and the keys must be kept free from dirt and moisture. Water and dirt on the keys can impair their
function.
7.6 Disposal
This sensor contains electronic components. Components are to be disposed of according to the regulations
prevailing in the respective country.