Technical Documentation
opti-check
v2.8.2-K11
49/332
ipf electronic GmbH
Lüdenscheid, Germany
9.2 Checking features
The features to be checked are composed and their parameters set in this step.
NOTE
Please note that even the best feature check can only calculate a satisfactory result if the
associated feature is clearly visible in the image.
If necessary, check the parameters for the image exposure again to obtain an optimum
image quality for your task!
NOTE
As each inspection task has tolerances with regard to the position of the test object, most
jobs begin with part location. The part location feature searches for the reference edges of
the test object and aligns all subsequent feature checks according to these reference
edges.
Add
opens the
New feature check
dialogue.
In this, a list of all available feature checks is presented. When a
feature to be checked has been selected, this appears automatically in the
feature list, with its current result
and the associated status.
A previously selected feature check is edited here.
Deletes a selected feature check from the list of features.
Deletes all feature checks from the list of features.
Содержание opti-check
Страница 1: ...Technical Documentation opti check...
