MANUAL
– Subject to alteration! Version: August 2022
ipf electronic gmbh
│
Rosmarter Allee 14
-
58762 Altena
-
Germany │ Tel +49 2351 9365
-
0
-
info@ipf-
electronic.com
27
6.5.4
Set up WLAN
On the
WLAN
page you can connect to a WLAN.
Fig. 15: "WLAN" page (UI shown serves only as an example)
1.
Connect a commercially available wireless adapter via the USB1 or USB2 interface. (e.g. TP Link Wireless N
Nano USB Adapter).
2.
To connect to a WLAN, set the slider
Enable network interface
to
On
.
The MAC address, which is also printed on the housing of the IoT gateway, is displayed.
3.
Enter the name and password of the WLAN you want to connect to.
4.
Optional: Enter the IP address of an NTP server from which the device should obtain
its system time.
5.
Optional: Set the
Use routes from DHCP server
slider to
Off
to access only the local
network via this interface and access the Internet via another interface if necessary.
