ww
w
.ip
el
ec
tr
on
ix
.c
om
IPEX
(IP Electronix)
PH485REPi
:
User’s Manual
Page 5 of 8
Doc No. : PH485REPi-UM-001
15 August 2013
3
Package Checklist
Before installing the PH485REPi, verify that the package contains the following items:
1)
PH485REPi
2)
Installation CD-ROM
3)
#2 Phonix 7Pin Green terminals
NOTE: Notify your sales representative if any of the above items is missing or damaged.
4
Top Panel
Green LED: It is turned ON, when the power supply connects to +VS and GND correctly.
Yellow LED: It is blinking if there is a data stream from right to left side of the repeater.
Blue LED: It is blinking if there is a data stream from left to right side of the repeater.
5
Power Supply
Connect a DC voltage in range of +10V to +30V, bVS and GND terminals. If the power supply connects
correctly, the Green LED should be ON.
NOTE: It is not required to connect GND signal from one side to GND signal of other side.