Step
4
Step 4 – Assemble and Fit the Collar Receiver
Attaching the Collar Strap to the Collar Receiver
The Collar Receiver attaches to the Collar Strap by sliding through the
tabs on each side and going wrapping around the back of the Collar
Receiver. To accomplish this correctly, please view the diagram below:
(Include diagram/picture of the collar strap attaches to the collar receiver.)
Make sure it's the collar receiver for the model mentioned.
Fitting the Collar Receiver
Important: The proper fit and placement of the Collar Receiver is essential
for effective training. The electrodes must have direct contact with the
dog's skin.
(1) To fit the Collar Receiver, attach the Collar Strap to the Receiver.
(2) With the dog standing in front of you, place the Collar Receiver around
the dog's neck, so the receiver box and Contact Points are on the underside
of your dog's neck, making direct contact with the dog's skin. If direct
contact is not possible, shaving some fur away, to ensure good contact
is recommended.
(3) Fasten the collar strap. The fit should be snug, but not taut. A finger
should be able to be placed beneath the collar strap when around the
dog's neck.
(4) Allow the dog to wear the Collar Receiver for several minutes and
check the strap again. The dog will soon become more familiar with the
Collar Receiver, so it is crucial to ensure the fit comfortable and flattering.
10
9
Testing the Vibration Functions
1. Ensure the Toggle Switch is in the correct position for the Collar Receiver
you're testing.
2. Adjust the Intensity Dial off of 100.
3. Press the Vibration Button on your Remote Transmitter.
4. If done correctly, the Collar Receiver will vibrate.
Testing the Sound Functions
1. Ensure the Toggle Switch is in the correction for the Collar Receiver
you're testing. Press the Sound Button on your Remote Transmitter.
2. If done correctly, the Collar Receiver will emit sound.
(Figure 3-2)
(Figure 3-3)
Note: If wanting to test the shock function on yourself, please ensure your
finger or hand is across both contact points to ensure the connection
is complete. Otherwise, user will feel no stimulation.
CAUTION: RISK OF SKIN DAMAGE
For comfort, safety and effectiveness of this product please check
the fit of the dog's collar frequently. If observing any skin irritation,
immediately discontinue use of the collar for a few days. If the skin
condition persists beyond 48 hours, consult a veterinarian. These
collars can cause pressure necrosis, commonly known as bed sores,
if used incorrectly and is often misidentified as burns.