WIT-400HE Installation Manual
Date: 15/M
ar/2012
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of Ericsson-LG Co.Ltd.
20
4.
Debug Data Transfer and Diag Data Transfer
4.1
Debug Data Transfer
4.1.1 Check
Debug
Setting
1) Run windows
“
command prompt
”
2) Move to the directory
“
c:\WIT-400H
”
, where
“
wit400trace.exe
”
exists.
- You can change to any other directory.
3) Try
“
ping
”
to the IP address of WIT-400HE.
- If replies, go to next step.
- If not, check the network configuration of PC and WIT-400HE.
4) Run
“
wit400trace.exe
”
- If TCP port 3490 is not available, you can change as
“
wit400trace.exe [TCP port #]
”
.
Ex) wit400trace.exe 5000
4.1.2
Sending Debug Data from WIT-400HE
1) Press “*1478621#” + “Send” key
2) Set the level for debugging
- Block Name : each block name
- Mode On/Off: the debug type
- Debug Level : each debug level