Thread the cords through the adjacent channels.
Connect to network
Connect one end of the Ethernet cable into the LAN Ethernet port on the bottom of
the phone. Then connect the other end of the cable to your network connection.
or,
If you are connecting your PC Ethernet through the phone, connect the Ethernet
cable to the PC Ethernet port on the phone instead. Then connect the other end of
the Ethernet cable to the LAN Ethernet connection on your PC.
Connect to power
If you are using Power over Internet (PoE), skip this step.
Connect the AC power adapter to the AC adaptor jack on the bottom of the phone.
Plug the AC power adapter into the nearest AC power outlet.
Attach the stand
Align the tabs on the stand with one of the pairs of notches on the bottom of the
phone. You can choose a lower profile or higher profile setting.
Push the stand upward in the slots as far as it can go until firmly attached.
If you need help, contact
iPECS Support
.