iPECS LIP-7004N Скачать руководство пользователя страница 550 | Manualshive

Страница: 550 / 586

iPECS LIP-7004N Скачать руководство пользователя страница 550

LIP-8050V User Guide

You may terminate screening, leaving the caller in voice mail to
record a message, talk with the caller and record the
conversation in the mailbox, or answer the call and disconnect
the Voicemail. The AME feature is only available when using
the iPECS VMIM/VSF Voice Mail; a M

UTE

and AME button

should be programmed (refer to Appendix A User Program
Codes).

To screen a call in Ring mode:



Press the flashing

AME

button, the caller’s voice is broadcast

over the station speaker and stored in the voice mailbox (in the
Speaker mode, broadcast is automatic).

To stop the voice broadcast and leave the caller in Voice Mail:



Press the illuminated

SPEAKER

button.

To talk with the caller and record the conversation in Voice Mail:



Press

the

MUTE

button.

To answer the call and cancel the voice message recording:



Press the illuminated

AME

button, the caller is connected and

the Voice Mail disconnected.

4.4

Differential Ring Signals

When multiple phones in a small area ring, it can be difficult to
tell which are ringing. With the LIP-8050V, 12 ring tones are
available for differentiating one phone’s ringing from another.
These tones are stored on the phone’s permanent memory.

To select a Ring Tone from the Main Menu:
Select Sounds,
Select ICM/CO Ring
For each ring select a Ring Tone.

To select a Ring Tone from phone memory:



Press

the

TRANS

/

PGM

button,



Dial 1 for Ring Tones,



Dial 1 or 2 for Internal or External ring,



Dial 01-12 for the desired tone number; a confirmation tone is

heard,



Press

HOLD

/

SAVE

to make the selection.

«
...
548
549
550
551
552
...
»

Содержание LIP-7004N











































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов