iPECS Communicator for iOS
Installation and Operation Guide
Issue 1.2
9
3.
Basic phone functions
With
iPECS Communicator
, calls can be placed, received and transferred employing the resources of the
host iPECS platform.
3.1
Place a Call
iPECS Communicator
can place internal calls to other users and external calls over CO
lines and trunks of the iPECS host. Calls can be placed by dialing the number with the
dial pad, selecting a number from the Call Log or Contacts lists.
After dialing or selecting a number from a list, the Call button places the call.
The call screen, shown below, displays the call information and various call controls
(Hold, Transfer, Mic, Speaker, etc.) described in later sections.
Notes:
If a WiFi network is not available to place the call and mobile data use is allowed,
iPECS
Communicator
will attempt to place the call over the mobile data network.
3.2
Answer a Call
When a call arrives, the call screen displays the incoming caller information and the
phone will notify you according to the Smartphone configuration and the client
Notification setting. The call is answered by selecting the green Audio button at the
bottom of the client and the active call screen displays.
Notes:
The name of the calling party may not be available until the call is
connected; the display will indicate the name when received from the host
iPECS system or the name matches a Contact.
