Subject to alterations
Version 1.0
IPCOMM GmbH
- 3 -
IPC191X1 Manual
Walter-Bouhon-Straße 4
Copyright © IPCOMM GmbH, 2022
90427 Nuremberg
All rights reserved
Germany
2 Hardware Description
2.1 General
As hardware platform for the protocol converter a 19" industrial PC is used. This solution offers a high
degree of flexibility, performance and reliability.
Important for the selection of our components are particular items like quality, availability and a high
durability.
Mounting and intensive tests of the gateway hardware are done in our company. Each device runs
through an intensive function test. This function test includes a burn-in test with full communication of
all interfaces (min. 48 hours). Drops of communication, transmission errors and every important
component with regard to function, temperature, voltages etc. are monitored. Hundreds of restarts are
executed whereby a connection to all interfaces is established at each reboot.
Quality assurance is done according to the four-eye principle. Each device passes a number of quality
inspections.
2.2 IEC 61850-3; EN 61850-3
The special requirements of the IEC 61850-3 standard for electromagnetic compatibility and power
supply are fulfilled by this hardware model, provided that signal cables with a maximum length of 10
meters are used.
2.3 Front View
Figure 1: IPC191X1 front view
S/N, model, voltage
CFast card
power LED
power button
HDD/SSD caddy or
DVD RW drive
(optional)
CPU LED
COM2
CFast
activity LED
