Subject to alterations
Version 1.1
IPCOMM GmbH
- 10 -
IPC191V5 Manual
Walter-Bouhon-Straße 4
Copyright © IPCOMM GmbH, 2022
90427 Nuremberg
All rights reserved
Germany
2.4.9
Power Supply
Power supplies with different input voltages can be used in the IPC191V5. Please pay attention to the
correct polarity and input voltage. The input voltage of the respective device is labeled on top of the
housing (see Figure 1).
The standard power supply is 115 / 230 V AC (90 - 264 V AC)
Power supply 12 / 24 V DC (9 - 32 V DC)
Power supply 48 / 60 / 110 V DC (30 - 120 V DC)
Other voltages on request
2.4.9.1
AC Power Supply
By using AC voltages a specific power supply cable (see figure below) is supplied. Please use this cable
exclusively:
Figure 11: power cable
2.4.9.2
DC Power Supply
By using DC voltages only a male connector is supplied. This connector has to be used. By connecting
the cable with the male connector the correct polarity must be kept. The wire cross-section must be at
least 1.5 mm².
Figure 12: DC voltage connection at the power supply
Figure 13: DC power cable (example - not included in the scope of delivery)
Attention!
Please check the silver product label to verify the correct input voltage before
operating the unit.
Attention!
Please observe the yellow instruction label for the correct connection of the DC
voltage supply.
PE
⏚
U
in
–
U
in
+
