IPC G25B, Руководство пользователя

Страница: 14 / 20

ENGLISH
14
IMPORTANT
To avoid damaging the surface of the floor to be treated, avoid rotating the
brushes/pads with the machine stationary.
IMPORTANT
To avoid damaging the batteries and shortening their working life, do not continue
using the machine once the batteries are flat.
IMPORTANT
Empty the dirty water tank each time you fill the detergent tank.
!
DANGER
Use suitable personal protection devices.
Emptying the dirty water tank:
1. There is a float in the dirty water tank which turns off suction when the tank is full.
2. Stop the machine by releasing the brush lever (fig. A, ref. 5)
3. Turn off all machine functions using the brush and suction motor button (fig. L, ref.
2-3).
4. remove the lid from the dirty water tank
5. lift the tank by the handle and empty the contents. At the end of work, rinse the
tank with clean water.
Emptying the detergent tank:
•
Proceed as described in points 1 to 5.
•
Disconnect the detergent tank hydraulic circuit from the hydraulic circuit of the machine
(fig. C, ref. 1).
•
lift the tank using the handle and empty the contents. At the end of work, rinse the tank
with clean water.
Stopping:
•
action the brush lever (fig. A, ref. 5)
•
press the brush switch (fig. L, ref. 3)
•
press the suction switch (fig. L, ref. 2)
•
raise the squeegee
•
raise the head
7.
PERIODS OF INACTIVITY
If the machine is not used for some time, remove the squeegee and brush (or abrasive
disks), wash them and put them away in a dry place (preferably in a bag or wrapped in
plastic film) away from dust.
Park the machine with the head raised.
Make sure the tanks are completely empty and perfectly clean.
Completely recharge the batteries before storing them. During long periods of inactivity,
you should charge the batteries regularly (at least once every two months) to keep them
constantly at maximum charge.