1
CT40 R - CT70 R Quick Guide
This Guide is intended for quick consultation only and does not replace the Use and Maintenance Manual.
Before using the machine, read the Use and Maintenance Manual contained in the machine packaging thoroughly and
rigorously respect all the instructions.
PREPARATION/OPERATION
Fill the detergent tank.
Lower the machine head by pressing the pedal
downwards and to the left.
Lower the squeegee using the lever.
Press the brush button to enable brush rotation
and turn the suction motor on.
Choose the direction of movement by moving
the direction selector, turn the potentiometer to
set the work speed.
Press the suction motor button to disable suc-
tion if you want to prewash the surface.
Select working pressure by turning the
adjustment knob.
Operate the drive lever.
Pay attention to the LEDs indicating the pres-
sure of the brushes on the work surface. The
following may be displayed:
a) 1 green LED on: minimum pressure;
b) 2 green LEDs on: medium pressure;
c) 3 green LEDs on: maximum permitted
pressure;
d) 3 green LEDs on + 1 red LED on: excessive
pressure.
Begin working
When you have finished cleaning, proceed as
follows:
Turn the brush motor off.
Turn the suction motor off.
Raise the machine head.
Raise the squeegee.
If necessary, charge the batteries.
Press the “H2O” button for at least 2 seconds
to enable detergent flow. Press the button repe
-
atedly to vary the quantity delivered.
PLDC01906