IPC Solutionki PC104-386L-2M Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 69

background image

NAGASAKI Corporation

Default setting: Absent

Password Check

This field enables password checking every time the computer is powered on or every time the

BIOS Setup is executed. If Always is chosen, a user password prompt appears every time and
the BIOS Setup Program executes and the computer is turned on. If Setup is chosen, the
password prompt appears if the BIOS executed.
Available Options: Setup, Always
Default setting: Setup

Wait for ‘F1’ If Error

AMIBIOS POST error messages are followed by:

Press <F1> to continue

If this field is set to Disabled, the AMIBIOS does not wait for you to press the <F1> key after an
error message.
Available Options: Disabled, Enabled
Default setting: Disabled

Hit ‘DEL’ Message Display

Set this field to Disabled to prevent the message as follows:

Hit ‘DEL’ if you want to run setup

It will prevent the message from appearing on the first BIOS screen when the computer boots.
Available Options: Disabled, Enabled
Default setting: Enabled

C000, 32k Shadow - E800, 32k shadow

These fields control the location of the contents of the 32KB of ROM beginning at the specified
memory location. If no adapter ROM is using the named ROM area, this area is made
available to the local bus. The settings are:

1. Disabled: The video ROM is not copied to RAM. The contents of the video ROM cannot

be read from or written to cache memory.

2. Enabled: The contents of C000h - C7FFFh are written to the same address in system

memory (RAM) for faster execution.

3. Cached: The contents of the named ROM area are written to the same address in system

memory (RAM) for faster execution, if an adapter ROM will be using the named ROM area.
Also, the contents of the RAM area can be read from and written to cache memory.

Available Options: Disabled, Enabled, And Cached

Default setting: Disabled

FLASH Disk
These fields control the location of the contents of the solid-state disk BIOS beginning at the
specified memory location.

Available Options: Disabled, D0000h, D8000, E0000, and E8000
Default setting: Disabled

Flash Disk Simulates
When HDD is selected, the system will boot from the flash disk as if it is a hard disk drive (C). When
FDD is selected, the system will boot from the flash disk as if it is a floppy disk drive (a:).

49

«
...
53
54
55
56
57
...
»

Содержание PC104-386L-2M






































































Отзывы:

Нет отзывов

Похожие инструкции для PC104-386L-2M

Бренд: Magiccos Страницы: 2

Бренд: Krups Страницы: 64

Бренд: German pool Страницы: 11

Бренд: Panasonic Страницы: 3

Бренд: Panasonic Страницы: 4

Бренд: Panasonic Страницы: 3

Бренд: Panasonic Страницы: 4

Бренд: Optoma Страницы: 4

Бренд: Optoma Страницы: 8

Бренд: Optoma Страницы: 4

Бренд: Vitek Страницы: 52

Бренд: Unold Страницы: 76

Бренд: Miranda Страницы: 47

Бренд: Elechomes Страницы: 14

Omnia.11 2001-00382-000

Бренд: Omnia Страницы: 12

Бренд: Hamilton Beach Страницы: 2

Бренд: Hamilton Beach Страницы: 31

Бренд: Hamilton Beach Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды