7
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
IMPORTANT INSTRUCTIONS
•
Before use the equipment must be correctly assembled with all of its components
•
Check that the electrical outlet is correct for use with the plug on the machine
•
Before connecting, check that the specified motor voltage corresponds to the main
voltage available
•
Never use the equipment near flammable, explosive or toxic substances: sparks from
the motor could cause dangerous reactions.
•
Always unplug the machine from the electrical outlet when leaving machine unattended
or before attempting any repair.
•
Service and repair should be done by qualified personnel only. Use only original
manufacturer’s replacement parts.
Operation
Operation
Operation
Operation
This machine is a commercial vacuum designed for dry or wet pick up . And must be stored
This machine is a commercial vacuum designed for dry or wet pick up . And must be stored
This machine is a commercial vacuum designed for dry or wet pick up . And must be stored
This machine is a commercial vacuum designed for dry or wet pick up . And must be stored
in a dry location. (S9DUSTPRO
in a dry location. (S9DUSTPRO
in a dry location. (S9DUSTPRO
in a dry location. (S9DUSTPRO----WD)
WD)
WD)
WD)
1. For dry use, attach paper bag to tank inlet deflector.
See Figure 1.
2. For Wet use, remove the paper bag from inlet deflector.
3. Ensure that the cartridge filter is securely attached to the
bottom of the vacuum head. See Figure 2.
4. Place vacuum head onto the tank and secure it with the two
clamps.
5. Insert hose into the tank inlet until it locks in place. See
Figure 3.
6. Attach appropriate cleaning tool. For optional power brush
attachment, see Power Head and Wand Assembly.
7. Activate the vacuum by pressing the switch on the vacuum
head.
Figure 1
Figure 2
Figure 3
After Use
After Use
After Use
After Use
1.
Store the cord on the hook.
2. Store the appliance indoors, away from sources of heat.
3. This appliance is provided with an automatically reset
thermal limiter to avoid damage to motor. If thermal limiter
operates do one or more of the following:
•
Change the bag
•
Clean or replace the cartridge filter
•
Check hose and tank inlet for any obstructions
•
Wait a few minutes for the thermal limiter to re-close the circuit
